Riso ComColor GD is the fastest printing solution in the industry in its category, 130 ppm. Its high productivity combined with its great versatility, reliability and quality make the GD Series a high-performance device for quick response to high-volume on-demand print jobs at the most competitive color printing cost on the market.
RISO’s high-speed inkjet technology, FORCEJET, consists of wide, color, in-line inkjet print heads arranged in parallel for single-pass printing of black, cyan, magenta, yellow and gray on A3/Ledger short-edge feed paper. Fast printing functionality combined with a rapid and stable paper supply results in an amazingly fast print speed of 130 pages per minute for A4 longedge feed in simplex.
A straight-path feeding system feeds paper horizontally to enable high-speed printing with minimal print offset. FORCEJET technology ensures optimal paper feed speed that is matched to the amount of ink being sprayed from the ink heads.
Special quick-drying, oil-based pigment ink developed exclusively for the ComColor GD series prevents reverse-side staining of printed paper as well as cockling, to allow for unprecedented high-speed duplex inkjet printing. The ink is also resistant to degradation from light and water.
Taking Quality to a Higher Level
The ComColor GD series is engineered with features that ensure stable output quality for consistent printing results at high speed, including a Piezo system that regulates ink amount. Black image quality has been improved by installing a newly-developed print head and black ink. Additional inks enrich the look of images and enhance overall color quality.
This unique RISO technology and approach to the printing process brings the added benefits of a low total cost of ownership when compared with toner technology, and greater control over cost management. It also enables practical migration away from simply highlight color or mono production to a cut sheet white paper solution. This provides genuine added value, as it eliminates the need to hold large volumes of pre-printed stock and opens up possibilities for a leap forward in color printing.
Consistent Output Quality
The ComColor GD series offers higher image quality and consistent printing results through RISO inkjet technology that features a Piezo system, which ensures stable output by controlling and regulating the amount of ink deposited on the paper.
Best Black Density
A newly-developed 600 dpi print head for black with special black ink supported by gray as a fifth ink delivers top quality, 10% higher black density than ever.
Enriched Color Images
Newly-developed magenta ink significantly improves full-color image quality by expanding the color gamut.
|Print Type||Line-type inkjet system|
|Ink Type||Oil-based pigment ink (Cyan, Magenta, Yellow, Black, Gray)|
|Print Resolution||Standard/High Chromogenic|
|Black: 600 dpi (main scanning direction) ×600 dpi (sub-scanning direction)|
|Cyan, Magenta, Yellow, Gray: 300 dpi (main scanning direction) × 300 dpi (sub-scanning direction)|
|Black: 600 dpi (main scanning direction) × 600 dpi (sub-scanning direction)|
|Cyan, Magenta, Yellow, Gray: 300 dpi (main scanning direction) × 600 dpi (sub-scanning direction)|
|Number of Gray Levels||Black: 4 gray levels|
|Cyan, Magenta, Yellow, Gray: 12 gray levels|
|Data Processing Resolution||Standard/High Chromogenic|
|Black: 600 dpi × 600 dpi|
|Cyan, Magenta, Yellow, Gray: 300 dpi × 300 dpi|
|Black: 600 dpi × 600 dpi|
|Cyan, Magenta, Yellow, Gray: 300 dpi × 600 dpi|
|600 dpi × 600 dpi|
|Warm-up Time||2 min. 30 sec. or less (at room temperature of 23 ºC (73.4 ºF))|
|First Print Time *1||5 sec. or less (A4 long-edge feed)|
|First Copy Time *1||7 sec. or less (A4 long-edge feed)|
|Continuous Print Speed *2*3||A4 long-edge feed||Simplex: 130 ppm Duplex: 65 sheets/minute (130 ppm)|
|Letter long-edge feed||Simplex: 130 ppm Duplex: 65 sheets/minute (130 ppm)|
|A4 short-edge feed||Simplex: 104 ppm Duplex: 52 sheets/minute (104 ppm)|
|Letter short-edge feed||Simplex: 104 ppm Duplex: 52 sheets/minute (104 ppm)|
|B4 (JIS) short-edge feed||Simplex: 88 ppm Duplex: 42 sheets/minute (84 ppm)|
|Legal short-edge feed||Simplex: 90 ppm Duplex: 42 sheets/minute (84 ppm)|
|A3 short-edge feed||Simplex: 78 ppm Duplex: 38 sheets/minute (76 ppm)|
|Ledger short-edge feed||Simplex: 76 ppm Duplex: 37 sheets/minute (74 ppm)|
|Paper Size||Standard Tray||Maximum: 340 mm × 550 mm (13 3/8″ × 21 5/8″)|
|Minimum: 90 mm × 148 mm (3 9/16″ × 5 27/32″)|
|Feed Tray||Maximum: 297 mm × 432 mm (11 11/16″ × 17″)|
|Minimum: 182 mm × 182 mm (7 3/16″ × 7 3/16″)|
|Printable Area||314 mm × 548 mm (12 3/8″ × 21 19/32″)|
|Guaranteed Print Area *4||Standard: Margin width of 3 mm (1/8″)|
|Maximum: Margin width of 1 mm (3/64″)|
|Paper Weight||Standard Tray||46 gsm to 210 gsm (12-lb bond to 56-lb bond)|
|Feed Tray||52 gsm to 104 gsm (14-lb bond to 28-lb bond)|
|Paper Tray Capacity||Standard Tray||Height up to 110 mm (4 5/16″)|
|Feed Tray||Height up to 56 mm (2 3/16″) (×3 trays)|
|Output Tray Capacity||Height up to 60 mm (2 3/8″)|
|PDL (Page Description Language)||RISORINC/C IV|
|Supported Protocols||TCP/IP, HTTP, HTTPs (TLS), DHCP, ftp, lpr, IPP, SNMP, Port9100 (RAW port), IPv4, IPv6, IPSec|
|Supported Operating Systems||Standard||Microsoft®: Windows Vista® (32-bit/64-bit), Windows® 7 (32-bit/64-bit), Windows® 8.1 (32-bit/64-bit), Windows® 10 (32-bit/64-bit),|
|Windows Server® 2008 (32-bit/64-bit), Windows Server® 2008 R2 (64-bit), Windows Server® 2012 (64-bit), Windows Server® 2012 R2 (64-bit), Windows Server® 2016 (64-bit)|
|Optional *5||Mac: Mac OS v10.8 (Mountain Lion), v10.9 (Mavericks), v10.10 (Yosemite), v10.11 (El Capitan), v10.12 (Sierra)|
|Linux (compatible with PPD only)|
|Network Interface||Ethernet 1000BASE-T/100BASE-TX/10BASE-T (2ch)|
|Memory Capacity||4 GB|
|Hard Disk *6||Capacity||500 GB|
|Available Space||Approx. 430 GB|
|Power Source||AC 100 V – 240 V, 12.0 A – 6.0 A, 50 Hz – 60 Hz|
|Power Consumption||Max. 1,200 W|
|Ready *7: 150 W or less|
|Sleep *8: 4 W or less|
|Stand-by: 0.5 W or less|
|Operating Noise||Max. 66 dB (A) A4 long-edge feed (Simplex) at the maximum print speed|
|Operating Environment||Temperature: 15 ºC to 30 ºC (59 ºF to 86 ºF)|
|Humidity: 40% to 70% RH (non-condensing)|
|Dimensions (W × D × H)||In use: 1,220 mm × 725 mm × 1,160 mm (48 1/32″ × 28 17/32″ × 45 21/32″)|
|With cover and tray closed: 1,160 mm × 705 mm × 1,015 mm (45 21/32″ × 27 3/4″ × 39 15/16″)|
|Required Space (W × D × H) *9||1,220 mm × 1,240 mm × 1,160 mm (48 1/32″ × 48 13/16″ × 45 21/32″)|
|Weight||Approx. 175 kg (386 lb)|
|Safety Information||IEC60950-1 compliant, Indoor, pollution degree 2 *10, At altitudes of 2,000 m or lower|
Please note that due to improvements and changes to the machine, some images and explanations in this manual may not correspond to your machine.
The specifications are subject to change without prior notice.
*1:Within 10 minutes after the last print job
*2:When using plain paper and recycled paper (85 gsm (23-lb bond)), and standard density setting. Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)]
*3:The continuous print speed varies depending on the type of optional output equipment connected.
*4:The margin when printing envelopes is 10 mm (3/8″). The guaranteed area when printing images is the area enclosed within 3 mm (1/8″) of the edges of the paper.
*5:Optional PS kit is required.
*6:One gigabyte (GB) is calculated as 1 billion bytes.
*7:Without printing and temperature adjustment operation.
*8:When setting [Power Consumption (in Sleep)] to [Low]
*9:With the front cover open and the operation panel in the upright position
*10:The pollution degree of the usage environment due to dirt and dust in the air. Degree “2” corresponds to a general indoor environment.
Please fill in the Form below, we shall contact You soon...